SCYRC CAR

Does the MJX Hyper Go H18P include lights out of the box? 

Yes, MJX Hyper Go H18P rc car comes stock with a complete light system identical to the ones on larger RC models. It makes night runs way more immersive and visually fun.

Buy: MJX Hyper Go H18P RC Car

Can the 7.4V 1200mAh battery for LDRC LD18499 remote control car be installed?
Buy: LDRC LD18499 BATTERY

Installing upgraded batteries for the LDRC LD18499 is simple even for beginners.

First, unscrew the battery compartment of the LDRC LD18499 RC car with a screwdriver.

Open the cover and take out the original stock…[Read more]

MJX Hyper Go H18P features an exclusive disconnect transmission function, which is not available on MJX Hyper Go H8P and MJX Hyper Go H12P.

It supports three modes: front-wheel drive, 4-wheel drive and disconnect transmission mode.

The disconnect transmission mode enables tank turning, a rare design among small-scale crawler RC cars.

Buy:…[Read more]

How to dismantle the frame of the LDRC LD18499 remote control car?

Turn the entire LDRC LD18499 RC car upside down and place it on a table.

There are two screws next to ldrc ld18499 gearbox base. Use a screwdriver to remove these two screws.

You will find that after lifting ld18499 middle chassis, the surrounding areas are…[Read more]

What Practical Benefits Does Flip-Up Quick Release Body Bring to YIKONG 8081 RC Car?

Compared to the traditional design that requires removing and inserting body clips (R-clips) at all four corners, the design of the YIKONG 8081 RC car makes daily battery changes and internal chassis tuning much more convenient and efficient for…[Read more]

How to install the connect rod on the rear axle of LDRC LD18401 RC car?

Begin by retrieving your replacement linkages. The pair designed for the LDRC LD18401 is the longest among the set of eight linkages.

Next, use a tool to clamp ldrc ld18401 shock double ball ends of the LDRC LD18401 mini rc car into the circular rings of the…[Read more]

First, take out LDRC LD18401 tie rod you purchased, and select only the two shortest ones with half-round from the eight tie rod. (these two front drive shafts that I circle)

Take out the shock double-ended screws, and use a tool to clamp the LDRC LD18401 shock ball end and the screw tightly. (The ball end and the…[Read more]

First, remove the body shell of the LDRC LD18401 RC car. Take care when taking apart the unit; tiny screws are prone to going missing. LDRC LD18401 chassis picture is attached below.

Keep all detached screws from the LDRC RC car in a storage bag to prevent loss.

When the LDRC LD18401 chassis frame is uncovered, disconnect the…[Read more]

What are the core power system and battery performance of SCY 10101?
SUCHIYU 10101 1/10 Brushed RC Car. It is equipped with a 550-size high-speed brushed motor with strong magnets that spins at 16,000 RPM, paired with a 2S 60A high-spec ESC to provide a 510W stable power output platform, delivering abundant and linearly controllable…[Read more]

The truck is tough, but the stock brushed motor runs super hot and is too slow now. Want to go brushless. Can the stock diffs handle the power? Do I need metal gears?

SUCHIYU 10101 rc car RTR has is 1/10 series and you can Smash This Link to get more SUCHIYU news on RCTOYSFORUM.

MJX Hyper Go H18P comes with an exclusive disconnect drive system that you won’t find on the H12P or H8P from the same lineup — an extremely rare feature for 1/18 scale crawlers.
It supports three switchable drive modes: 4WD, front-wheel drive, and disconnect drive mode.In disconnect mode, tank-style turning is available, greatly boosting cli…[Read more]

To cut costs, the MJX Hyper Go H18P comes with an all-in-one integrated ESC. However, if players plan to modify or upgrade the vehicle later, they will need to replace both the remote controller and the ESC together.

MJX Hyper Go H18P RC Car RTR has a part number of MJX Hyper Go 1/8 series and you can Smash This Link to get more MJX Hyper Go ne…[Read more]

Signs include slow or erratic steering, excessive noise, or complete failure to respond.

Driving with a damaged dogbone can lead to drivetrain damage, reduced power transmission, and poor handling.

Softer compounds are ideal for off-road and loose surfaces, while harder compounds work better on smooth, paved surfaces.

Upgrades can improve handling, increase stability, and reduce wear on other components.

This could be due to dead batteries, a faulty controller, or interference from other electronic devices.

Try replacing the batteries and ensuring the transmitter is within range of the car. If the problem persists, consider replacing the transmitter.

Batteries can lose their ability to hold a charge over time due to wear and tear. Try fully discharging and then recharging the battery to reset its memory.

If the problem persists, you may need to replace the battery.

To pair the SUCHIYU SCY 16101 RC car’s remote controller after replacing the batteries, first ensure both the car and controller are turned off.

Then, turn on the controller first, followed by the car. Most SUCHIYU controllers automatically sync with the car upon power-up if no previous pairing issues exist.

No, the motors of the SUCHIYU SCY 16106 and SCY 16101 RC cars are generally not interchangeable due to differences in specifications, design, and compatibility with each car’s gearbox and electronics.