Activity

First, take out LDRC LD18401 tie rod you purchased, and select only the two shortest ones with half-round from the eight tie rod. (these two front drive shafts that I circle)

Take out the shock double-ended screws, and use a tool to clamp the LDRC LD18401 shock ball end and the screw tightly. (The ball end and the…[Read more]

First, remove the body shell of the LDRC LD18401 RC car. Take care when taking apart the unit; tiny screws are prone to going missing. LDRC LD18401 chassis picture is attached below.

Keep all detached screws from the LDRC RC car in a storage bag to prevent loss.

When the LDRC LD18401 chassis frame is uncovered, disconnect the…[Read more]

What are the core power system and battery performance of SCY 10101?
SUCHIYU 10101 1/10 Brushed RC Car. It is equipped with a 550-size high-speed brushed motor with strong magnets that spins at 16,000 RPM, paired with a 2S 60A high-spec ESC to provide a 510W stable power output platform, delivering abundant and linearly controllable…[Read more]

Installation is extremely easy for beginner hobbyists.

First check whether the front lights you received for LDRC LD18401 are left‑right specific. LDRC LD18401 LED are white and transparent, with no left‑right distinction.

Next, organize all the lighting wires and stow them in the area circled in red.

Match the white LED beads to…[Read more]

MJX Hyper Go 16212, MJX Hyper Go 16213 and MJX Hyper Go 16218 RC cars are positioned as entry-level brushless high-speed RC cars.
Revised from the last-gen chassis, it is designed to suit beginners perfectly.

MJX Hyper Go 16212 gets a chassis upgrade. It trades the old spliced layout (central grey plastic plate + side black nylon parts) for a wider monolithic chassis, delivering a cleaner appearance and much larger internal space.

How to replace the battery of LDRC LD18499 RC car?
The 500mah battery of the LDRC LD18499 RC car is housed in the battery compartment at the rear of the vehicle.
The battery compartment of the LDRC LD18499 mini RC car is fastened with a screw. Loosen and remove it using a screwdriver.

Next, open the battery compartment of the LDRC…[Read more]

UDIRC UDI025 supports fully automatic pairing with no manual operation. The complete 3-step startup needs no extra buttons:

1. Open the bottom battery cover, install the lithium battery correctly and plug in the power plug properly with correct polarity.
2. Fit batteries into the remote control and turn on its side power switch.
3. Wait…

[Read more]

Yes, the MJX Hyper Go 10210 has been upgraded in the following aspects:

ESC & Power: The 10208 uses a 100A ESC, while the 10210 is upgraded to a 120A ESC for better motor performance and stronger power output.

Body Structure: The 10208 features thick plastic suspension arms. The 10210 keeps flexible plastic suspension mounts and adopts 7075…[Read more]

It gets blazing hot.

While it claims to be 3S compatible, the 2S LiPo is the true “sweet spot” for this electronics combo. If you drop a 3S pack in the ZD Racing SC12 and do back-to-back full-throttle speed runs in thick grass, the 45A ESC and motor will hit thermal shutdown very quickly.

If you want to bash on 3S, buying an aftermarket…[Read more]

This behavior is quite common for entry-level off-road RC vehicles. Install brass wheel hex adapters to add unsprung weight and lower the center of gravity. Additionally, switch to softer foam tires to significantly boost overall traction.

JJRC C8832 RC Car is part of JJRC 1/8 series and you can Smash This Link to get more MJX Hyper Go news o…[Read more]

The truck is tough, but the stock brushed motor runs super hot and is too slow now. Want to go brushless. Can the stock diffs handle the power? Do I need metal gears?

SUCHIYU 10101 rc car RTR has is 1/10 series and you can Smash This Link to get more SUCHIYU news on RCTOYSFORUM.

While MJX has not officially announced future upgraded accessories for the H18P yet, based on the brand’s consistent support for its other Hyper Go models, we can expect a range of optional upgrades to launch soon. Common add-ons like metal suspension parts, performance shocks, upgraded tires, and electronics are likely to be released, and t…[Read more]

YIKONG YK8081 DF8 is a premium 1/8 scale ready-to-run (RTR) short course RC truck, engineered for high-speed off-road performance and hardcore RC hobbyist use.Scale: 1/8

• Overall Dimensions: 660(L) × 339(W) × 275(H)mm
• Wheelbase: 388mm
• Power System: 3674 2800KV high-performance brushless motor
• Electronic Speed Controller: 120A b…

[Read more]

I went to this store to purchase the accessories. I felt that the staff was very responsible and the quality was excellent.

MJX Hyper Go H18P RC Car Parts suitable for MJX Hyper Go H18P series and you can Smash This Link to get more MJX Hyper Go news on RCTOYSFORUM.

MJX Hyper Go H18P comes with an exclusive disconnect drive system that you won’t find on the H12P or H8P from the same lineup — an extremely rare feature for 1/18 scale crawlers.
It supports three switchable drive modes: 4WD, front-wheel drive, and disconnect drive mode.In disconnect mode, tank-style turning is available, greatly boosting cli…[Read more]