The chinese new year slot on 22Bet combines stunning design with engaging gameplay. Every spin feels like a celebration with the chance for big rewards. The chinese new year slot continues to be a favorite among players who love themed slots.

Quick question: If you won big on the chinese new year…[Read more]

MN Model MN212 package includes three core components: a fully assembled crawler truck, a full-proportional pistol-grip transmitter, and an accessory kit containing small decorative body trims, an instruction manual, a certificate of conformity, and a charging…[Read more]

Buy: LDRC LD18401 RC Car

Installation is extremely easy for beginner hobbyists.
First check whether the front lights you received for LDRC LD18401 are left‑right specific. LDRC LD18401 LED are white and transparent, with no left‑right distinction.

Next, tidy up all the light wir…[Read more]

Yes, MJX Hyper Go H18P rc car comes stock with a complete light system identical to the ones on larger RC models. It makes night runs way more immersive and visually fun.

Buy: MJX Hyper Go H18P RC Car

Installing upgraded batteries for the LDRC LD18499 is simple even for beginners.

First, unscrew the battery compartment of the LDRC LD18499 RC car with a screwdriver.

Open the cover and take out the original stock…[Read more]

WPL C94 rc truck comes with an extremely compact factory battery compartment that cannot accommodate oversized lithium batteries, limiting its runtime during outdoor driving.

Buy: WPL C94 RC Car

Buy: LDRC LD18401 Tires

Take out all tires, screws, tools and front/rear axles.

Fit ldrc ld18401 tires onto axles; ld18401 tires are universal with no left/right or top/bottom distinction.

A clicking sound confirms proper seating.

Place…[Read more]

WPL C94 RC car side mirrors tend to come loose easily. Remove WPL C94 rc truck rear roof cover and secure the mirrors from inside the body with the included screws.

Glue alone cannot hold them firmly and they will fall off during…[Read more]

MJX Hyper Go H18P comes with four adjustable semi-metal oil-filled shocks delivering ample suspension travel and excellent flex articulation for crawling.

Buy:  MJX Hyper Go H18P

MJX Hyper Go H18P features professional portal axles typical of crawlers, greatly boosting its terrain traversability over rough ground.

Buy: MJX Hyper Go H18P

It supports three modes: front-wheel drive, 4-wheel drive and disconnect transmission mode.

The disconnect transmission mode enables tank turning, a rare design among small-scale crawler RC cars.

Buy:…[Read more]

No, you can’t. To cut costs, MJX Hyper Go H18P integrates the ESC and receiver into one single unit.Therefore, if you want to replace the transmitter, you have to replace the ESC and other matching parts as well.

Buy: MJX Hyper Go H18P RC Car

Unfortunately, none of the doors (front, rear and tailgate) can open in the WPL C94 RC Car.

You have to undo three roof mounting screws to fit the figure inside, which is inconvenient.

Buy: WPL C94 RC Car

Buy: LDRC LD18499 Drive Shaft

Many new hobbyists struggle to refit the ldrc ld18401 drive shaft after removal; here’s the installation guide.

First, prepare two ldrc ld18401 screws and the drive shaft.

Take out ldrc ld18401 front and rear axles and locate t…[Read more]

Suchiyu 10101 transmitter delivers lag-free control up to 100 meters and supports multiple cars racing simultaneously with zero cross-interference.

Buy: SUCHIYU 10101 RC Car

YIKONG YK8081 rc car rear bumper is directly connected to the roll cage via hinges. Meanwhile, the nylon components at the rear of the body shell are integrally formed with the bumper, creating a solid one-piece shock-absorbing structure.

Removing the ldrc ld18499 shocks is easy for beginners and even simpler for experienced users.

First, locate the screws on the ldrc ld18499 body shell. Use a screwdriver to remove ldrc ld18499 screws securing the shocks. There are four ld18499 shock absorbers in total, held by four…[Read more]

Our store currently sells replacement parts for the JXC 1087X (SP4301)V2 RC car. All parts are of excellent quality and guaranteed to be 100% brand new.

Buy: JXC 1087X RC…[Read more]

How to dismantle the frame of the LDRC LD18499 remote control car?

Turn the entire LDRC LD18499 RC car upside down and place it on a table.

There are two screws next to ldrc ld18499 gearbox base. Use a screwdriver to remove these two screws.

You will find that after lifting ld18499 middle chassis, the surrounding areas are…[Read more]

Compared to the traditional design that requires removing and inserting body clips (R-clips) at all four corners, the design of the YIKONG 8081 RC car makes daily battery changes and internal chassis tuning much more convenient and efficient for…[Read more]

Remove the complete car body of LDRC LD18499 first; after disassembly, the wiring plugged onto the receiver is visible.

Next, locate the two screws on the ldrc ld18499 receiver board cover.

After spotting the pair of screws securing ldrc ld18499 receiver board,…[Read more]

How to replace the battery of LDRC LD18499 RC car when you are a beginner?

The 500mah battery of the LDRC LD18499 RC car is housed in the battery compartment at the rear of the vehicle.

A single screw locks the battery compartment of LDRC LD18499 mini RC car, unscrew it with a screwdriver to open.

After opening the battery…[Read more]

The core hardware, powertrain systems and electronic components of MJX Hyper Go 16212, 16213 and 16218 are completely identical.

MJX Hyper Go 16212 16213 16218 rc car main differences only lie in the exterior styling, body shell design and some model-specific accessories.

Begin by retrieving your replacement linkages. The pair designed for the LDRC LD18401 is the longest among the set of eight linkages.

Next, use a tool to clamp ldrc ld18401 shock double ball ends of the LDRC LD18401 mini rc car into the circular rings of the…[Read more]

Take out the shock double-ended screws, and use a tool to clamp the LDRC LD18401 shock ball end and the screw tightly. (The ball end and the…[Read more]

Keep all detached screws from the LDRC RC car in a storage bag to prevent loss.

When the LDRC LD18401 chassis frame is uncovered, disconnect the…[Read more]

First check whether the front lights you received for LDRC LD18401 are left‑right specific. LDRC LD18401 LED are white and transparent, with no left‑right distinction.

Next, organize all the lighting wires and stow them in the area circled in red.

Match the white LED beads to…[Read more]

Next, open the battery compartment of the LDRC…[Read more]

1. Open the bottom battery cover, install the lithium battery correctly and plug in the power plug properly with correct polarity.
2. Fit batteries into the remote control and turn on its side power switch.
3. Wait…

[Read more]

ESC & Power: The 10208 uses a 100A ESC, while the 10210 is upgraded to a 120A ESC for better motor performance and stronger power output.

Body Structure: The 10208 features thick plastic suspension arms. The 10210 keeps flexible plastic suspension mounts and adopts 7075…[Read more]

While it claims to be 3S compatible, the 2S LiPo is the true “sweet spot” for this electronics combo. If you drop a 3S pack in the ZD Racing SC12 and do back-to-back full-throttle speed runs in thick grass, the 45A ESC and motor will hit thermal shutdown very quickly.

If you want to bash on 3S, buying an aftermarket…[Read more]