Activity

How to install the transmission shaft of the LDRC LD18401 remote control car?

Buy: LDRC LD18499 Drive Shaft

Many new hobbyists struggle to refit the ldrc ld18401 drive shaft after removal; here’s the installation guide.

First, prepare two ldrc ld18401 screws and the drive shaft.

Take out ldrc ld18401 front and rear axles and locate t…[Read more]

SCY 10101 rc car remote controller adopts stable 2.4GHz RF technology.

Suchiyu 10101 transmitter delivers lag-free control up to 100 meters and supports multiple cars racing simultaneously with zero cross-interference.

Buy: SUCHIYU 10101 RC Car

What are the distinctive features of the rear anti-collision design of YIKONG 8081 remote control vehicle?

YIKONG YK8081 rc car rear bumper is directly connected to the roll cage via hinges. Meanwhile, the nylon components at the rear of the body shell are integrally formed with the bumper, creating a solid one-piece shock-absorbing structure.

How to remove the shocks of LDRC LD18499 rc car?

Removing the ldrc ld18499 shocks is easy for beginners and even simpler for experienced users.

First, locate the screws on the ldrc ld18499 body shell. Use a screwdriver to remove ldrc ld18499 screws securing the shocks. There are four ld18499 shock absorbers in total, held by four…[Read more]

Where can I purchase the accessories for the JXC 10878X (SP4301) remote control car? JXC 1087X is the flagship model of the JXC SP4301 1/43 scale miniature RC car platform.

Our store currently sells replacement parts for the JXC 1087X (SP4301)V2 RC car. All parts are of excellent quality and guaranteed to be 100% brand new.

Buy: JXC 1087X RC…[Read more]

How to dismantle the frame of the LDRC LD18499 remote control car?

Turn the entire LDRC LD18499 RC car upside down and place it on a table.

There are two screws next to ldrc ld18499 gearbox base. Use a screwdriver to remove these two screws.

You will find that after lifting ld18499 middle chassis, the surrounding areas are…[Read more]

What Practical Benefits Does Flip-Up Quick Release Body Bring to YIKONG 8081 RC Car?

Compared to the traditional design that requires removing and inserting body clips (R-clips) at all four corners, the design of the YIKONG 8081 RC car makes daily battery changes and internal chassis tuning much more convenient and efficient for…[Read more]

How to remove the receiver board on the LDRC LD18499 RC Truck?

Remove the complete car body of LDRC LD18499 first; after disassembly, the wiring plugged onto the receiver is visible.

Next, locate the two screws on the ldrc ld18499 receiver board cover.

After spotting the pair of screws securing ldrc ld18499 receiver board,…[Read more]

How to replace the battery of LDRC LD18499 RC car when you are a beginner?

The 500mah battery of the LDRC LD18499 RC car is housed in the battery compartment at the rear of the vehicle.

A single screw locks the battery compartment of LDRC LD18499 mini RC car, unscrew it with a screwdriver to open.

After opening the battery…[Read more]

MJX Hyper Go 16212 16213 16218 High Speed RC Car RTR

The core hardware, powertrain systems and electronic components of MJX Hyper Go 16212, 16213 and 16218 are completely identical.

MJX Hyper Go 16212 16213 16218 rc car main differences only lie in the exterior styling, body shell design and some model-specific accessories.

How to install the connect rod on the rear axle of LDRC LD18401 RC car?

Begin by retrieving your replacement linkages. The pair designed for the LDRC LD18401 is the longest among the set of eight linkages.

Next, use a tool to clamp ldrc ld18401 shock double ball ends of the LDRC LD18401 mini rc car into the circular rings of the…[Read more]

First, take out LDRC LD18401 tie rod you purchased, and select only the two shortest ones with half-round from the eight tie rod. (these two front drive shafts that I circle)

Take out the shock double-ended screws, and use a tool to clamp the LDRC LD18401 shock ball end and the screw tightly. (The ball end and the…[Read more]

First, remove the body shell of the LDRC LD18401 RC car. Take care when taking apart the unit; tiny screws are prone to going missing. LDRC LD18401 chassis picture is attached below.

Keep all detached screws from the LDRC RC car in a storage bag to prevent loss.

When the LDRC LD18401 chassis frame is uncovered, disconnect the…[Read more]

What are the core power system and battery performance of SCY 10101?
SUCHIYU 10101 1/10 Brushed RC Car. It is equipped with a 550-size high-speed brushed motor with strong magnets that spins at 16,000 RPM, paired with a 2S 60A high-spec ESC to provide a 510W stable power output platform, delivering abundant and linearly controllable…[Read more]

Installation is extremely easy for beginner hobbyists.

First check whether the front lights you received for LDRC LD18401 are left‑right specific. LDRC LD18401 LED are white and transparent, with no left‑right distinction.

Next, organize all the lighting wires and stow them in the area circled in red.

Match the white LED beads to…[Read more]

MJX Hyper Go 16212, MJX Hyper Go 16213 and MJX Hyper Go 16218 RC cars are positioned as entry-level brushless high-speed RC cars.
Revised from the last-gen chassis, it is designed to suit beginners perfectly.

MJX Hyper Go 16212 gets a chassis upgrade. It trades the old spliced layout (central grey plastic plate + side black nylon parts) for a wider monolithic chassis, delivering a cleaner appearance and much larger internal space.

How to replace the battery of LDRC LD18499 RC car?
The 500mah battery of the LDRC LD18499 RC car is housed in the battery compartment at the rear of the vehicle.
The battery compartment of the LDRC LD18499 mini RC car is fastened with a screw. Loosen and remove it using a screwdriver.

Next, open the battery compartment of the LDRC…[Read more]

UDIRC UDI025 supports fully automatic pairing with no manual operation. The complete 3-step startup needs no extra buttons:

1. Open the bottom battery cover, install the lithium battery correctly and plug in the power plug properly with correct polarity.
2. Fit batteries into the remote control and turn on its side power switch.
3. Wait…

[Read more]