MJXHYPERGO Parts

This is likely due to ‌overheating‌ or ‌low-voltage protection‌ kicking in.
Let the ESC cool down, and check the battery voltage.
If the battery is old, replace it. Ensure the ESC’s airflow isn’t blocked.

Grinding usually means worn gears or lack of lubrication.
Open the diff, inspect the gears for chips/damage, and replace if needed.
Apply high-quality ‌silicone diff grease‌ to reduce friction.

This can be caused by low battery voltage in the remote, signal interference (e.g., from Wi-Fi routers or other RC cars), or a faulty receiver antenna.
Replace remote batteries, avoid crowded frequencies, and ensure the car’s receiver antenna is fully extended.

Uneven wear is often caused by aggressive driving (e.g., constant drifting or hard braking) or mismatched tire hardness for the surface.
For example, soft tires grip better on dirt but wear fast on pavement. Replace tires with ones suited to your terrain (soft for dirt, hard for asphalt).

I bought drift tires for my MJX Hyper Go 7303 RC car…[Read more]

Recently MJX Hyper Go 7303 came out with a new 1/7th large scale rally bike, even equipped with a sensorless brushless ESC, I would like to get my hands on a 1/7th large scale rally rc car, where is a more suitable place to buy it? Does any player have a reliable store to recommend to me?

Additional lights can enhance safety and aesthetics, making the car more visible to others and giving it a unique look.

Signs include excessive wear, cracking, or bending. Replacing it can improve power transmission and reduce drivetrain losses.

Front bumpers are usually made of durable plastic composites designed to withstand impacts and protect the car’s front end.

Signs include reduced runtime, slower charging, or the car not holding a charge as long as it used to.

Depending on the severity of the crack, you may be able to repair it using plastic welding or epoxy resin.

However, for severe damage, replacing the body shell is often the best option.

Adjusting the differential tightness, or preload, affects traction and handling. This is usually done by turning adjustment screws or rings on the differential housing.

No, the wheels of the MJX Hyper Go 14209 RC car are generally not interchangeable with those of the 14210 model due to potential differences in size, design, and compatibility with the car’s axle and suspension system.

The charging time for the MJX Hyper Go 14210 RC car’s battery with its USB charger typically varies between 2 to 4 hours, depending on the initial battery level and the power output of the USB source.

Signs of a failing motor in the MJX Hyper Go 14209 may include reduced power output, unusual noises, and overheating. Regular maintenance and inspections can help identify and prevent motor issues.

It’s not recommended to use a higher amperage charger for the MJX Hyper Go H12Y RC car’s battery, as it may overcharge the battery and cause damage. Always use the charger that is specifically designed for your RC car’s battery.

It’s recommended to service the differential in the MJX Hyper Go 14303 RC car every 3-6 months or after extensive use, depending on the driving conditions. This includes checking for wear, cleaning, and relubricating as needed.

The steering servo compatible with the MJX Hyper Go 14301 is the one specified by the manufacturer, ensuring precise steering control.

Possible causes include a faulty charger, incompatible battery, or dirty battery contacts. Check for compatibility, clean contacts, and test the charger with another battery.